Schaerer Coffee art Operations Instructions download pdf (Page 14)

www.schaerer.com Installation & commissioning

14 / 66

Operating instructions / V05 / 05.2012

Power supply

Conditions

The electrical power supply must be connected in accordance with the applicable regulations (VDE 0100)

and the regulations of the country of installation. Type of power cable at least H05 RN-F. The voltage spe-

cied on the serial plate must match the supply voltage at the installation location.

● The phase must be fused at the ampere value specied on the serial plate.

● It must be possible to disconnect the device from the mains power supply at all poles.

● Never operate a device with a damaged power cord. Have a defective power cord or plug repla-

ced immediately by a qualied service technician.

● Schaerer AG recommends against using an extension cable. If, despite this, an extension

cable is used (minimum cross-section: 1.5 mm2), observe the manufacturer data for the cable

(operating instructions) and the locally applicable regulations.

● The mains cables must be installed in such a way that they do not present a tripping hazard.

Do not pull the cords over corners or sharp edges, pinch them between objects or allow them

to hang loosely in a room. Do not position cables over hot objects and protect them from expo-

sure to oil and aggressive cleaning products.

● Never lift or pull the device by the power cable. Never pull the plug out of the socket by its

cord. Never touch the power cord or plug with wet hands! Never insert a wet plug into a power

socket!

Power requirements

SCA

Power requirements

Fuse (installation

site)

Connecting cable

conductor cross-

section

1L, N, PE: 220-240V~ 50/60 Hz

2000-2400 W 1x 10 A 3x 1,0 mm²

3000-3600 W 1x 16 A 3x 1,5 mm²

2L, PE: 200-220V 2~ 50/60 Hz

2000-2200 W 2x 15 A 3x 1,5 mm²

2600-3200 W 2x 15 A 3x 1,5 mm²

4700-5800 W 1x 30 A 3x 10 AWG

SCA Plus

Power requirements

Fuse (installa-

tion site)

Connecting

cable conductor

cross-section

1L, N, PE: 220-240V~ 50/60 Hz

2000-2400 W 10A 3x 1 mm

3000-3600W 16A 3x 1.5 mm

5700-6900W 30A 3x 4 mm

3L, N, PE: 380-415V 3N~ 50/60 Hz

5700-6900W 3x 16A 5x 1.5 mm

8300-10100W 3x 16A 5x 1.5 mm

2L, PE: 200-220V 2~ 50/60 Hz

4700-5900W 2x 30A 3x 10 AWG

4700-5900W 2x 25A 3x 2.5 mm

3L, PE: 200V 3~ 50/60 Hz 7000W 3x 20A 4x 2.5 mm

3L, PE: 220V 3~ 50/60 Hz 6900-8500W 3x 25A 4x 2.5 mm

CAUTION!

Risk of machine

damage!

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 65 66

Comments to this Manuals

No comments

Schaerer Coffee art Operations Instructions Page 14

Comments to this Manuals

Related products and manuals for Coffee makers Schaerer Coffee art