Schaerer Coffee art User Manual Page 38

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 37
User manual SCA - EN
Version 02 09.2006
Troubleshootingwww.schaerer.com
38
Display message Cause What to do
selection locked
milk system locked
The steam temperature has fallen to
115 °C.
Wait until the temperature has been reached
again.
If the message remains on the display:
Contact a qualied service technician.
selection locked
exchange lter
The programmed water volume (liters /
months) has passed through the lter.
Beverage output is blocked!
The water lter must be replaced.
Contact a qualied service technician.
selection locked
service request
The programmed number of beverages
(cups / month) has been reached.
Service is required.
Contact a qualied service technician.
selection locked
Initialising
The software and the processor are
restarted. The brewer moves into the
"Home" position.
Beverage output is blocked.
Switch the machine off and then back on.
If the message remains on the display:
Contact a qualied service technician.
selection locked
watertank empty
The water tank is empty.
Rell the water tank and insert it.
If the message remains on the display:
Contact a qualied service technician.
selection locked
waste watertank full
The waste water tank is full. Empty the waste water tank.
selection locked
insert ground coffee
The DECAF button was pushed to dispense
a DECAF beverage.
Open the manual slot (tablet slot) and pour in
the DECAF powder (coffee powder).
No milk foam / insufcient milk foam
Picture Cause What to do
1
2
The air hole on the expander is clogged.
The milk tubes do not touch the bottom of
the container.
1. Detach the expander [ 1 ].
2. Do not take the tubes out of the
holder [ 2 ].
Place the milk tubes into the container so
that they touch the bottom of the container.
-
3. Insert the instrument provided into the
air hole.
Page view 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 49 50

Comments to this Manuals

No comments