Schaerer Coffee Joy Operations Instructions download pdf (Page 31)

BASCJ_EN

V01 | 02.2011

www.schaerer.comService and maintenance

Adjusting the grinding fineness

The grinding fineness is influenced by wear on the grinder disk. To ensure a constant grinding

quality, the grinding fineness needs to be adjusted when required.

CAUTION!

User at risk!

Danger of injury from rotating grinding discs in the grinder.

Never reach into the bean hopper while the coffee machine is switched on.

CAUTION!

Risk of machine

damage!

If the grind level is set while the grinder is idle, the grinder can be set too firmly and may

not start as a result.

The grinder must always be running while it is being adjusted.

► Open the cover of the bean hopper.

► Place the multitool onto the grind level adjuster (see figure).

► Press the beverage button (e.g. espresso) and wait for the grinder to start running.

Option 1: Finer setting of grind level

► Press the multitool down and turn anticlockwise.

Option 2: Coarser setting of grind level

► Press the multitool down and turn clockwise.

Water filter (Option)

Installing the water filter for the internal drinking water tank

The "Filter for the internal drinking water tank" initial installation set can be obtained from

Schaerer AG if the water quality is insufficient (order number: 071398).

► Remove the water outlet screen installed in the water tank.

► Open the water filter box.

 The water filter adapter is located at the top, and the separately packaged filter car-

tridge is found beneath it.

► Pull up the locking mechanism on the adapter.

► Attach the adapter to the water outlet connector and push down the locking mechanism.

Read the previous chapter entitled "Water quality".

The water filter is only suitable for installation in the internal drinking water tank of the machine.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

No comments

Schaerer Coffee Joy Operations Instructions Page 31