Schaerer Coffee Joy Operations Instructions Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
www.schaerer.com Service and maintenance
BASCJ_EN
V01 | 02.2011
30
Service and maintenance
Decalcification
When the machine needs to be decalcified, a corresponding request appears on the display.
The decalcification interval depends on the following factors:
Water hardness
Water flow rate
Use of a water filter
CAUTION!
User at risk!
Danger of poisoning from ingesting or inhaling the decalcifier.
Do not drink or inhale the decalcifier or the rinse water output during the decalcification
process.
CAUTION!
Risk of machine
damage!
Household decalcifiers can destroy the coffee machine.
For decalcification, use Schaerer decalcifiers only. Liability cannot be accepted for
damage resulting from the use of other decalcifiers.
The decalcification message on the display can be delayed by pressing the - button. However,
dispensing of beverages will be blocked after another 50 brewings. After that, the decalcifica-
tion process must be carried out.
Slide the beverage outlet to the highest position.
Press the release on the back of the beverage outlet and pull the foamer head down and
off.
Detach the milk hose from the milk foamer.
Press the button.
The cleaning menu appears on the display.
Use the button and button to navigate to the "machine descaling" menu item.
Confirm the selection with the button.
Empty the drip tray.
Take the drinking water tank out of the machine.
Remove the water filter (if present).
Pour a full bottle of Schaerer decalcifier (750 ml) into the drinking water tank.
Fill the drinking water tank all the way with water.
Slide the drinking water tank back into the machine.
Place a large container (min. 3 l) under the beverage and hot water outlet.
Start the decalcification process with the button.
The decalcification process begins.
The remaining decalcification time is shown on the display.
After approx. 30 min, the request to empty the drinking water tank appears on the display.
Empty the drinking water tank and rinse it thoroughly
Confirm the display request with the button.
Fill the drinking water tank with fresh water and slide it back into the machine.
Confirm the display request with the button.
The decalcification process is continued.
The remaining decalcification time is shown on the display.
Recommendation: After the decalcification process is completed, dispense a test beverage
and pour it away.
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Comments to this Manuals

No comments